Discover M11 Flash File MT6580 Hang Logo Lcd Fix Firmware
CLICK HERE >>> https://urloso.com/2tuoy8
```
How to Fix Discover M11 Flash File MT6580 Hang Logo Lcd Problem
If you are looking for a solution to fix the hang logo and lcd problem on your Discover M11 smartphone, you have come to the right place. In this article, we will show you how to flash the official firmware file for your device and restore its functionality.
The Discover M11 is a budget-friendly Android phone that runs on the MediaTek MT6580 chipset. It has a 5.5-inch display, 1GB of RAM, 8GB of internal storage, and a 3000mAh battery. However, some users may encounter issues such as the device getting stuck on the boot logo or the lcd screen not working properly. This can be caused by various reasons such as corrupted system files, malware infection, faulty hardware, or improper flashing.
Fortunately, there is a way to fix these problems by flashing the Discover M11 flash file MT6580 hang logo lcd fix firmware. This is the official stock ROM that comes with the device and can help you restore its original settings and performance. By following the steps below, you can easily flash the firmware file on your Discover M11 and solve the hang logo and lcd issue.
Requirements
Before you proceed with the flashing process, you need to prepare some things first. Make sure you have the following:
A Discover M11 smartphone with at least 50% battery charge.
A USB cable to connect your phone to your computer.
A Windows PC with SP Flash Tool installed. You can download it from here.
The Discover M11 flash file MT6580 hang logo lcd fix firmware. You can download it from here.
A backup of your personal data such as contacts, messages, photos, etc. Flashing the firmware will erase everything on your phone.
Steps to Flash Discover M11 Flash File MT6580 Hang Logo Lcd Fix Firmware
Once you have everything ready, you can follow these steps to flash the firmware file on your Discover M11:
Extract the downloaded firmware file on your computer. You should see a folder with several files inside.
Launch SP Flash Tool on your computer and click on the \"Download\" tab.
Click on the \"Scatter-loading\" button and browse to the folder where you extracted the firmware file. Select the \"MT6580_Android_scatter.txt\" file and click \"Open\".
Make sure all the boxes are checked and click on the \"Download\" button.
Turn off your Discover M11 and remove the battery if possible. Then connect it to your computer via USB cable while holding the volume down button.
SP Flash Tool will detect your device and start flashing the firmware file. Wait for the process to complete. You will see a green tick mark when it is done.
Disconnect your phone from your computer and insert the battery if you removed it. Then turn it on and wait for it to boot up.
Congratulations! You have successfully flashed the Discover M11 flash file MT6580 hang logo lcd fix firmware on your device. You should now be able to use your phone normally without any issues.
``` ec8f644aee